The Rdm coldroom panel is a compact, fully featured coldroom controller panel. Developed from the
Mercury range of controllers, the coldroom panel is robust, reliable and carries a 5 year warranty.
The Mercury coldroom panel has been specifically developed to suit a variety of coldroom needs. The purpose developed enclosure has a detachable display/keypad
for applications where the main enclosure is required to be
out of reach.
The panel is available with/without a main isolator switch. Each internal circiut has either fuse or circuit breaker protection.
Based on Mercury technology, the controller has parameters that give this product complete flexibility for controlling either produce (HT) or freezer coldrooms (LT).
Coldroom lights can be configured for maximum energy saving by using a timer (local or remote) to enable the lights and using the "lights on when door is open" feature. A front panel override switch is available when the door needs to be closed and the lights required to be on.
Coldroom panel features include:
15A defrost relay; N/O, N/C and Common
15A compressor/LLV relay; N/O, N/C, Common
6A Light relay; N/C, N/O, Common
5A Fixed live for condensate heater
Door open sensor
Volt - free alarm relay; N/O, N/C and Common
1A Fixed live for pressure release valve
5A Fixed live for condensate heater
6 Probe inputs
Network
The Panel is capable of connecting to either a TCP/IP local area network (recommended) or an RS485 network or controlling in standalone mode with no network output.
Configuration
The Coldroom Panel (both the EEV and Compressor/LLV versions) has 2 types:
| Display value | Type |
| 1 | LT Coldroom |
| 2 | HT Coldroom |
Detailed Humidistat information (PDF format):
PDF:
Mercury coldroom Panel
